A sturdy security bracket can be installed to act as a permanent deterrent to thieves. Consisting of two U-shaped 2 mm powder coated galvanised steel plates which interlock through the lower water heater bracket. The bracket can be easily secured with a padlock (not included).
Installation Can be installed in approximately ten minutes by the homeowner, gasfitter, or builder.
How it works The bracket prevents access to the bolts fixing the unit to the wall. This locks the lower section of the Rinnai INFINITY in place, and prevents the unit from being quickly removed from the wall. The bracket is suitable for all Rinnai INFINITY water heaters, and can be retrofitted to existing installations.
Ideal for Builders installing gas units on new homes that need to protect the Rinnai INFINITY before the home is sold or handed over to the new owners.
Can be installed on all cladding systems like weatherboard, brick, and plaster
Can be installed inside all Rinnai INFINITY recess boxes
Safety, especially if you have young children, the hot water can be preset to a child-safe level
No need to mix hot and cold water, this reduces the affect of temperature spiking when another tap in the building is turned on
You use your continuous flow unit more efficiently as less gas is required to heat water to 40 °C (typical shower temperature) than at 55 °C (default temperature without controllers)
Allow diagnosis of problems (such as gas supply disruption) in the unlikely event of a fault, or for a maintenance review when the INFINITY is serviced.
Extended warranty: Rinnai INFINITY installations, when a controller is installed receive an extra two years on the INFINITY warranty.
Colour: White
Dimensions (mm): 120H x 90W x 20D
All controllers come with 10m of cable
Available Temperature Settings: 37-46, 48, 50, 55 °C (60, 65, 70, 75 °C for HD models)
IP Rating: Rinnai controllers are not IP (Waterproof) rated. The controllers are low voltage (12 V DC) from the Rinnai INFINITY via a cable to the controller. Rinnai does not recommend placing a controller where they will get wet from a shower head, tap or water fixture. They are water resistant, not water proof
Description
A sturdy security bracket can be installed to act as a permanent deterrent to thieves. Consisting of two U-shaped 2 mm powder coated galvanised steel plates which interlock through the lower water heater bracket. The bracket can be easily secured with a padlock (not included).
Installation Can be installed in approximately ten minutes by the homeowner, gasfitter, or builder.
How it works The bracket prevents access to the bolts fixing the unit to the wall. This locks the lower section of the Rinnai INFINITY in place, and prevents the unit from being quickly removed from the wall. The bracket is suitable for all Rinnai INFINITY water heaters, and can be retrofitted to existing installations.
Ideal for Builders installing gas units on new homes that need to protect the Rinnai INFINITY before the home is sold or handed over to the new owners.
Can be installed on all cladding systems like weatherboard, brick, and plaster
Can be installed inside all Rinnai INFINITY recess boxes
Features
Safety, especially if you have young children, the hot water can be preset to a child-safe level
No need to mix hot and cold water, this reduces the affect of temperature spiking when another tap in the building is turned on
You use your continuous flow unit more efficiently as less gas is required to heat water to 40 °C (typical shower temperature) than at 55 °C (default temperature without controllers)
Allow diagnosis of problems (such as gas supply disruption) in the unlikely event of a fault, or for a maintenance review when the INFINITY is serviced.
Extended warranty: Rinnai INFINITY installations, when a controller is installed receive an extra two years on the INFINITY warranty.
Specifications
Colour: White
Dimensions (mm): 120H x 90W x 20D
All controllers come with 10m of cable
Available Temperature Settings: 37-46, 48, 50, 55 °C (60, 65, 70, 75 °C for HD models)
IP Rating: Rinnai controllers are not IP (Waterproof) rated. The controllers are low voltage (12 V DC) from the Rinnai INFINITY via a cable to the controller. Rinnai does not recommend placing a controller where they will get wet from a shower head, tap or water fixture. They are water resistant, not water proof
100% KIWI OWNED & OPERATED
LOCAL KNOWLEDGE & EXPERTISE
LARGEST OFF-GRID PRODUCT RANGE IN NZ
Use left/right arrows to navigate the slideshow or swipe left/right if using a mobile device
Choosing a selection results in a full page refresh.
Press the space key then arrow keys to make a selection.
